A large part of the colleagues has followed a course on drawing interpretation and parts measurement
In the recent months a large part of the colleagues has followed a course on drawing interpretation and parts measurement, organised by the Mikrocentrum at Euro-Techniek internally. The diplomas were handed out with the special remark that one participant has made a perfect evaluation.
Also this year we have exhibited at the Hannover Fair.
At the foto, one gets a good mpression from the Holland stand in the “Industrial supply” Hall 4, where we, together with a large number of dutch suppliers formed a decently large “Holland” block.
A number of employees have been trained by Produsoft in the use of VISICAD
A number of employees from both toolshop and stamping department have been trained by Produsoft in the use of VISICAD. VISICAD -specifically aimed at the tooling industry- is for some 20 years already in use at Euro-techniek as CAD/CAM/CAE package. In this two day training, new developments have been illuminated, from which the fast strip […]
At the same time as the relocation we installed an additional wash plant
At the same time as the relocation of our existing wash plant (degreasing equipment), we also installed an additional wash plant, which we already acquired in used condition last year. We now have 2 wash plants capacity, both manufactured by AMA, of which one is manually loaded, the other one operates automatically. This extension was […]
After 17 years we have send-off our Ferrari B17
With our milling machines, after 17 years we have send-off our Ferrari B17 und we have replaced this machine by a Makino F5. By doing so, we have progressed to a higher accuracy level, and we have again a modern machine with a faster machne control, which is better suiter for nowadays CAM software. This […]
We have bought an additional Kaiser 125 Ton press
In the middle of last year, we have bought an additional Kaiser 125 Ton press, and this press is overhauled by the Beisele company, as wel mechanically as electrically, and has entered our production in March to increase the capacity with our heavy presses. In this area we know have 2x a 250 Ton Kaiser, […]
The new cleanroom has been delivered
The new cleanroom has been delivered. It is 4 times larger than the old one, approximately 100 square meters ISO Class 8, divided into 2 area’s, one meant for assembling, testing and packaging inherently clean work, and one for not inherently clean work like tampon printing.
We have invested in a Haimer Power Clamp Preset NG
In our toolshop we have invested in a Haimer Power Clamp Preset NG in order to mount milling cutter in their housing. This method gives us a correctly mounted tool in shorter time.
Our cleanroom has been evaluated
After the commisioning last month of our cleanroom, now it also has been evaluated. As expected ISO class 7 for the intrinsic clean part, and ISO class 8 for the other area.
Tumbling/deburring has been relocated
Tumbling/deburring has been relocated, and the associated infrastructure was upgraded. Now the water treatment is on an elevated platform above the machines, and the associated drying equipment can be easily removed once not necessary.